Updated on February 3, 2022
Two Steps to Fix a Leak in Your Swimming Pool
Swimming pools can leak through almost any part of their hardware, pipes, or even directly through the outer shell. Since a structure surrounds the pool, it’s essential to repair leaks as quickly as possible, save energy, water, and chemicals, prevent further damage to pool structural elements, and wash away harmful fill dirt that supports the pool deck and pool walls. Leaks in the pool can lead to mold growth, damage to filter systems, softening of swimming pool water, algae growth, and structural damage to surrounding structures. In some cases, leaks can even result in pool closure.
Before repairing a leaking pool, it’s essential first to identify the source of the leak with Pool Repair Las Vegas. While leaks in the outer shell are often easy to repair, such as simple patching, leaks in other areas, including pipes or plumbing fixtures, can be more difficult. Whether the leak originates in plumbing, piping, or the outer shell itself, knowing the leak’s exact location will make the repair much easier.
Fortunately, most leaks are self-correcting. If the leak originates within the pool structure itself, pool owners have many quick repair and inspection options. While concrete pool owners can call a pool professional company to determine if the leak is, in fact, a structural problem, leaks in the pool can often be fixed by inspecting the area for signs of wear and discoloration. This type of visual inspection is the perfect way to pinpoint a leak’s location so it can be attended to before structural work needs to be done.
If a pool leak is located in or around the building’s walls or foundation, it is important for immediate attention. Leaks in the pool may indicate a more extensive problem with the plumbing system, including pipes and fixtures leaking internally, a crack in the foundation, or a crumbling wall. In these cases, pool owners should contact a local plumbing company. To assess the problem properly, a contractor will need to be brought in to inspect the area, gather samples, evaluate them, and provide remediation services. If the leak’s cause is determined to be a plumbing issue, the contractor will need to know how the leak is associated with the plumbing system, carry out repairs, and remove the affected materials.
Pool pumps can also cause pool leaks, especially in older systems. Most pool pumps contain steel or cast iron, which can develop cracks, corrosion, and welds overtime. This can result in pool leaky spots. Pool pump repair is often necessary, but sometimes the damage is too great that the only solution is to replace the entire pump. This is particularly true if the damage is found while the pool is not in use.
Although most leaks in swimming pools occur above ground, some can start below the surface. This can be caused by tree roots, tree branches brushing up against the side of a house, debris kicked up by swimmers, or any number of other reasons. If a leak develops at an area where the floor and walls meet, it is called a water line leak. These can usually easily be repaired by a handy homeowner with some basic repair tools. However, in some cases the damage is too extensive that professional repair is required.
When a pump or other element is found to be the culprit in many leaks, it is necessary to determine how to fix-a-leak. Sometimes, replacing the faulty part will correct the leak. Sometimes, it may be necessary to remove and repair the surrounding components. While this is not usually necessary when pool issues are minor (i.e., a small crack), it is necessary to repair major defects when it manifests itself in larger, more expensive leaks.
If nothing shows up on the initial inspection or determined that a leak is serious, a second step in fixing a leak is needed. The second step is a bucket test. The bucket test is done in two steps: first, using pool water; and second, observing the water’s color in the bucket. The bucket is filled halfway with pool water in the first step, allowing for a full sample to be collected. In the second step, a bucket with colored dye is used, and the dye is observed for color changes.